Called/Calling Party Transformation Pattern Behavior on UCM 7.0

While calling out you cannot DM the calling party number using ‘Calling Party Transformation Pattern’, on the same while calling in you cannot DM the called party number using ‘Called Party Transformation Pattern’.

If you require to manipulate as mentioned you can do it either on the Gateway or Trunk for the ‘calling in’ cases (unfortunately you don’t have much choice for such route) and on the Translation Pattern, Route List, Route Pattern, Gateway and Trunk for ‘calling out’ cases (you have lots of choice here!).

Limitations of such ‘Calling/Called Party Transformation Pattern’ is resolved on UCM 8.0 and later versions so far I heard but didn’t tested it yet.

Advertisements

About Mijanur Rahman
Mijanur started blogging to save and share his study and research notes. A deep diver in technologies and loves to participate in technical brainstorming. Proud father of two wonderful daughters loves to spend time with them. He writes about the topics that people deal with every day mainly on technology arena. To get in touch contact him at bilashece@gmail.com

2 Responses to Called/Calling Party Transformation Pattern Behavior on UCM 7.0

  1. Mijanur Rahman says:

    Hi Dinu,
    Both Translation Pattern and Transformation Patter (either Calling or Called) are used for digit manipulations but they work on different stage of call routing/dial plans.
    Translation Pattern works at the first stage of dialed number pressed matching regardless what is configured on Route Pattern or Transformation Patterns etc. Whenever you are pressing any digit from phone it will first try to match Translation Pattern.
    Transformation Pattern can work at ingress/egress gateway whenever calls are coming in/out, it can also be applied on Device Pool or even inside device (at phone, gateway etc.).

    The step of digit manipulations is like below for outgoing calls:

    Translation Pattern > Route Pattern > Route List > Route List Detail > Gateway/Trunk > Called Party Transformation Pattern
    OR
    Translation Pattern > Route Pattern > Gateway/Trunk > Called Party Transformation Pattern

    For inbound calls:
    Calling Party Transformation Pattern and/or Incoming Calling Party Settings.

  2. dinu says:

    can you tell me the exact definition of translation pattern and transformation pattern.

    translation pattern is used for translating outgoing and incoming dialed number ?

    and transformation pattern is used within the site like 4 digit transformation ?

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: